Polyethylene: is a plastic based material with medium to high density rating that can be modified in processing. Polyethylene is the most widely used plastic in manufacturing.
Milspec: Military standards are most often defined by an efficient operation and substantial longevity in inhospitable or rugged conditions and environments.
Bellevilles: sometimes referred to as disk springs, may be stacked to create a more constant spring effect and various degrees of deflection according to the application needs.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| N401P8E | N401P8E | 20000 | 0.370 | 0.183 | 0.036 | |
| NAS1515-H7L | NAS1515-H7L | 0 | REV 4 | 0.750 | 0.453 | 0.031 |
| NAS1149CN416B | NAS1149CN416B | 21650 | REV 4 | 0.312 | 0.125 | 0.016 |
| AN960-916L | AN960-916L | 142900 | REV 18 | 1.062 | 0.578 | 0.032 |
| NAS1149F0863B | NAS1149F0863B | 3300 | REV 4 | 0.875 | 0.515 | 0.063 |
| Title | Outside Dia. | Inside Dia. | Thickness | Item Name | Material |
|---|---|---|---|---|---|
| 560-376-063 | 0.529 | 0.207 | 0.063 | Special Flat Washers - Brass | Brass |
| 560-149-024 | 0.313 | 0.12 | 0.024 | Special Flat Washers - Brass | Brass |
| 560-569-016 | 0.622 | 0.379 | 0.016 | Special Flat Washers - Brass | Brass |
| Title | Outside Dia. | Inside Dia. | Thickness | Material |
|---|---|---|---|---|
| 475-178-020 | 0.291 | 0.191 | 0.02 | Aluminum |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 300-1383-074 | 1.123 | 0.266 | 0.074 |