Metric Standard Washer

All Tolerances on OD and ID are + - .005

Materials: Steel, Stainless, Brass, Aluminum

Results per page:

	Item #	Size	Outside Dia.	Inside Dia.	Thickness	Material
All 25 rows on this page are selected.
	MW-1	1.6	4.000 mm	1.700 mm	0.300 mm	Any Material
	MW-2	1.7	4.500 mm	1.800 mm	0.300 mm	Any Material
	MW-3	2	5.000 mm	2.200 mm	0.300 mm	Any Material
	MW-4	2.3	6.000 mm	2.500 mm	0.500 mm	Any Material
	MW-5	2.5	6.500 mm	2.700 mm	0.500 mm	Any Material
	MW-6	2.6	7.000 mm	2.800 mm	0.500 mm	Any Material
	MW-7	3	7.000 mm	3.200 mm	0.500 mm	Any Material
	MW-8	3.5	8.000 mm	3.700 mm	0.500 mm	Any Material
	MW-9	4	9.000 mm	4.300 mm	0.800 mm	Any Material
	MW-10	5	10.000 mm	5.300 mm	1.000 mm	Any Material
	MW-11	6	12.500 mm	6.400 mm	1.600 mm	Any Material
	MW-12	7	14.000 mm	7.400 mm	1.600 mm	Any Material
	MW-13	8	17.000 mm	8.400 mm	1.600 mm	Any Material
	MW-14	10	21.000 mm	10.500 mm	2.000 mm	Any Material
	MW-15	12	24.000 mm	13.000 mm	2.500 mm	Any Material
	MW-16	14	28.000 mm	15.000 mm	2.500 mm	Any Material
	MW-17	16	30.000 mm	17.000 mm	3.000 mm	Any Material
	MW-18	18	34.000 mm	19.000 mm	3.000 mm	Any Material
	MW-19	20	37.000 mm	21.000 mm	3.000 mm	Any Material
	MW-20	22	39.000 mm	23.000 mm	3.000 mm	Any Material
	MW-21	24	44.000 mm	25.000 mm	4.000 mm	Any Material
	MW-22	26	50.000 mm	27.000 mm	4.000 mm	Any Material
	MW-23	27	50.000 mm	28.000 mm	4.000 mm	Any Material
	MW-24	28	50.000 mm	29.000 mm	4.000 mm	Any Material
	MW-25	30	56.000 mm	31.000 mm	4.000 mm	Any Material