Flat Washers: primarily used with other hardware, such as nuts and bolts to distribute forces in the process of tightening. Tightness is determined by pattern features such as nominal screw sizes, screw pitch thread, interior and exterior diameter ratios and height.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| NAS1149CN532B | NAS1149CN532B | 10000 | REV 4 | 0.438 | 0.140 | 0.032 |
| MS15795-442 | MS15795-442 | 500 | NASM15795 REV 1 | 0.500 | 0.219 | 0.036 |
| MS9549-14 | MS9549-14 | 3350 | AS9549 | 0.812 | 0.526 | 0.028 |
| MS27183-3 | MS27183-3 | 23545 | REV J | 0.250 | 0.125 | 0.017 |
| AN960-D1016 | AN960-D1016 | 5000 | REV 21 | 1.188 | 0.640 | 0.063 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-3851-060 | 0.686 | 0.471 | 0.06 |
| 650-2405-050 | 0.437 | 0.269 | 0.05 |
| 220-434-062 | 0.875 | 0.375 | 0.062 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance |
|---|---|---|---|---|
| SU-188- | .690 | +.005-.000 | .605 | +.005-.000 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance | Thickness | Thickness Tolerance | Material |
|---|---|---|---|---|---|---|---|
| SP3-9 | .373 | +.000-.005 | .253 | +.005-.000 | .062 | +-.002 | Stainless Steel |