1008 Steel: is an economical, general purpose steel grade offering moderate strength and toughness. As a standard grade, 1008 steel is used in many common, low-stress applications.
Aircraft: deals with the development and manufacturing of products, structures, materials and devices used in aircrafts. Aircraft standards are established based on the extreme temperature, pressure and ware exposure faced in air operations.
One Wave Washers: are intended to reduce joint loosening over time and for minimal deflections in tighter applications. Friction control and prevention of damage caused by vibration are common motivations for use.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| AN901-32A | AN901-32A | 0 | REV 10 | 2.745 | 2.505 | 0.048 |
| NAS1149C1063R | NAS1149C1063R | 28550 | REV 4 | 1.188 | 0.640 | 0.063 |
| MS9549-13 | MS9549-13 | 0 | AS9549 | 0.750 | 0.463 | 0.028 |
| NAS1149F1890P | NAS1149F1890P | 0 | REV 4 | 1.875 | 1.140 | 0.090 |
| NAS1149C1732B | NAS1149C1732B | 2000 | REV 4 | 1.812 | 1.078 | 0.032 |
| AN960-1216L | AN960-1216L | 8500 | REV 18 | 1.312 | 0.765 | 0.032 |
| N400P5 | N400P5 | 36900 | 0.245 | 0.120 | 0.028 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-1458-025 | 0.749 | 0.201 | 0.025 |
| 650-4871-015 | 1.495 | 0.769 | 0.015 |
| 300-2900-010 | 1.017 | 0.893 | 0.01 |
| 300-1482-062 | 0.475 | 0.281 | 0.062 |
| 440-169-062 | 1 | 0.312 | 0.062 |
| Title | Size | Outside Dia. | Inside Dia. | Thickness | Material |
|---|---|---|---|---|---|
| N4-250062NM | #4 | 0.25 | 0.115 | 0.062 | Nylon |
| Title | Outside Dia. (min/max) | Inside Dia. (min/max) | Free Height (min/max) | Thickness | Material |
|---|---|---|---|---|---|
| AB30-150045 | 1.480/1.500 | .755/.756 | 0.093 | 0.045 | Stainless Steel |