1008 Steel: is an economical, general purpose steel grade offering moderate strength and toughness. As a standard grade, 1008 steel is used in many common, low-stress applications.
Industrial: deals with the development and manufacturing of washers and shims for devices used in various industrial manufacturing arenas.
Three Wave Washers: provide exceptional load bearing capacity within their setting, however do not offer the deflection range of one wave washers. Three wave washers are primarily used in limited axial spaces.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| MS15795-821 | MS15795-821 | 2093 | NASM15795 REV 1 | 1.750 | 0.688 | 0.108 |
| AN960-JD616 | AN960-JD616 | 3200 | REV 21 | 0.625 | 0.390 | 0.063 |
| N401P53 | N401P53 | 0 | 3.230 | 1.418 | 0.140 | |
| NAS1149F0563P | NAS1149F0563P | 65150 | REV 4 | 0.562 | 0.328 | 0.063 |
| MS27183-55 | MS27183-55 | 36900 | REV J | 0.734 | 0.375 | 0.064 |
| AN970-7 | AN970-7 | 2820 | NASM970 REV 1 | 1.812 | 0.453 | 0.109 |
| N402P20 | N402P20 | 0 | 1.730 | 1.042 | 0.090 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-546-062 | 0.751 | 0.138 | 0.062 |
| 650-1629-030 | 0.373 | 0.208 | 0.03 |
| 650-3401-095 | 0.75 | 0.389 | 0.095 |
| 940-39-010 | 0.498 | 0.337 | 0.01 |
| 300-1758-124 | 1.373 | 0.347 | 0.124 |
| 300-1052-030 | 0.432 | 0.22 | 0.03 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance | Thickness | Thickness Tolerance | Material |
|---|---|---|---|---|---|---|---|
| SP1-18 | .250 | .005 | .187 | +.005-.000 | .004 | .0005 | Stainless Steel |