1010 Steel: is a common, plain carbon, steel grade with minimal to moderate strength and toughness properties. 1010 steel is economical and often selected for low-demand, commonplace applications.
Industrial: deals with the development and manufacturing of washers and shims for devices used in various industrial manufacturing arenas.
One Wave Washers: are intended to reduce joint loosening over time and for minimal deflections in tighter applications. Friction control and prevention of damage caused by vibration are common motivations for use.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| N402P14 | N402P14 | 3110 | 0.865 | 0.459 | 0.056 | |
| N402P12B | N402P12B | 2534 | 0.615 | 0.334 | 0.056 | |
| N402AP33B | N402AP33B | 26000 | 0.245 | 0.089 | 0.028 | |
| N402P39E | N402P39E | 26200 | 0.557 | 0.198 | 0.036 | |
| AN960-XC1616L | AN960-XC1616L | 5000 | REV 21 | 1.750 | 1.015 | 0.032 |
| NAS1515-M14 | NAS1515-M14 | 0 | REV 4 | 1.500 | 0.890 | 0.063 |
| N402P61 | N402P61 | 0 | 0.245 | 0.063 | 0.022 |
| Title | Outside Dia. | Inside Dia. | Thickness | Item Name | Material |
|---|---|---|---|---|---|
| 560-85-019 | 0.169 | 0.088 | 0.019 | Special Flat Washers - Brass | Brass |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-316-015 | 0.219 | 0.123 | 0.015 |
| 650-4947-049 | 1.468 | 0.815 | 0.049 |
| 300-349-059 | 0.321 | 0.13 | 0.059 |
| 300-937-033 | 0.311 | 0.204 | 0.033 |
| 220-147-031 | 0.375 | 0.129 | 0.031 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance | Thickness | Thickness Tolerance | Material |
|---|---|---|---|---|---|---|---|
| SP2-80 | .500 | .005 | .313 | +.005-.000 | .002 | .0005 | Stainless Steel |