1020 Steel: is a plain carbon steel grade providing increased strength and ductility. 1020 steel retains integrity in basic structural applications while still being a low cost material.
Automotive: this industry deals with the development and manufacturing of automobiles and vehicular products for commercial and official purposes. A wide range of parts and components are used that must endure a range of operational and environmental circumstances imposed by consumers.
One Wave Washers: are intended to reduce joint loosening over time and for minimal deflections in tighter applications. Friction control and prevention of damage caused by vibration are common motivations for use.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| AN960-8 | AN960-8 | 146500 | REV 18 | 0.375 | 0.174 | 0.032 |
| AN960-D1016 | AN960-D1016 | 5000 | REV 21 | 1.188 | 0.640 | 0.063 |
| AN960-B2616 | AN960-B2616 | 0 | REV 21 | 2.375 | 1.640 | 0.090 |
| N400P43 | N400P43 | 9400 | 0.990 | 0.396 | 0.056 | |
| N402P16 | N402P16 | 0 | 1.115 | 0.584 | 0.056 | |
| MS20002-6 | MS20002-6 | 7700 | NASM20002 REV 2 | 0.687 | 0.378 | 0.062 |
| AN960-JD2016 | AN960-JD2016 | 0 | REV 21 | 2.000 | 1.265 | 0.090 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 300-1403-031 | 0.561 | 0.268 | 0.031 |
| 300-1480-062 | 0.438 | 0.281 | 0.062 |
| 550-267-031 | 0.75 | 0.45 | 0.031 |
| 650-2016-018 | 0.346 | 0.254 | 0.018 |
| 650-3738-050 | 0.561 | 0.441 | 0.05 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance | Thickness | Thickness Tolerance | Material |
|---|---|---|---|---|---|---|---|
| SP3-7 | .373 | +.000-.005 | .253 | +.005-.000 | .020 | +-.001 | Stainless Steel |
| Title | Outside Dia. | Inside Dia. | Material | Thickness |
|---|---|---|---|---|
| 380-205-065 | 0.875 | 0.535 | 316 Stainless Steel | 0.065 |