1020 Steel: is a plain carbon steel grade providing increased strength and ductility. 1020 steel retains integrity in basic structural applications while still being a low cost material.
Milspec: Military standards are most often defined by an efficient operation and substantial longevity in inhospitable or rugged conditions and environments.
Special Washers: are any washers defined by non-standard qualities and non-circular interiors and exterior shaping. Special washers include washers customized through materials, diameter measurements and ratios, height (thickness) and form.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| N402P39 | N402P39 | 8800 | 0.557 | 0.198 | 0.036 | |
| MS16212-16 | MS16212-16 | 2065 | REV B | 1.740 | 0.802 | 0.122 |
| AN960-XC616 | AN960-XC616 | 4000 | REV 21 | 0.625 | 0.390 | 0.063 |
| MS51496-P79 | MS51496-P79 | 1300 | REV B | 0.130 | 0.089 | 0.010 |
| AN960-B4016 | AN960-B4016 | 0 | REV 21 | 3.250 | 2.515 | 0.090 |
| NAS1149C0863B | NAS1149C0863B | 18800 | REV 4 | 0.875 | 0.515 | 0.063 |
| NAS1149D0763J | NAS1149D0763J | 13150 | REV 4 | 0.750 | 0.453 | 0.063 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 300-1177-047 | 0.454 | 0.251 | 0.047 |
| 300-2564-031 | 0.811 | 0.632 | 0.031 |
| 650-2796-084 | 2.554 | 0.316 | 0.084 |
| 650-5118-121 | 2 | 1.003 | 0.121 |
| 650-1074-036 | 0.498 | 0.18 | 0.036 |
| 220-378-016 | 0.437 | 0.306 | 0.016 |
| Title | Outside Dia. | Inside Dia. | Thickness | Material |
|---|---|---|---|---|
| 475-243-065 | 0.328 | 0.218 | 0.065 | Aluminum |