4130 Steel: is a molybdenum and chromium low alloy steel with properties that allow for easy hardening through heat treatment. 4130 steel provides notable structural strength and moderate heat resistance.
Milspec: Military standards are most often defined by an efficient operation and substantial longevity in inhospitable or rugged conditions and environments.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| N400P19 | N400P19 | 1870 | 1.480 | 0.918 | 0.090 | |
| NAS620B6L | NAS620B6L | 15000 | REV 7 | 0.267 | 0.143 | 0.016 |
| NAS620A416 | NAS620A416 | 10400 | REV 7 | 0.468 | 0.255 | 0.063 |
| N401P39 | N401P39 | 7500 | 0.557 | 0.198 | 0.036 | |
| AN960-C10LL | AN960-C10LL | 60400 | REV 21 | 0.438 | 0.203 | 0.016 |
| AN960-816 | AN960-816 | 0 | REV 18 | 0.875 | 0.515 | 0.063 |
| N400P28 | N400P28 | 0 | 4.480 | 2.605 | 0.219 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 300-1483-033 | 0.481 | 0.281 | 0.033 |
| 650-3540-071 | 0.631 | 0.403 | 0.071 |
| 650-2534-061 | 0.485 | 0.283 | 0.061 |
| 650-1682-029 | 0.464 | 0.213 | 0.029 |
| Title | Outside Dia. | Inside Dia. | Thickness | Size | Material |
|---|---|---|---|---|---|
| F8-375062NM | 0.375 | 0.17 | 0.062 | #8 | Fibre |
| F4-250031NM | 0.25 | 0.115 | 0.031 | #4 | Fibre |
| Title | Outside Dia. | Inside Dia. | Thickness | Item Name | Material |
|---|---|---|---|---|---|
| 560-641-031 | 1.25 | 0.471 | 0.031 | Special Flat Washers - Brass | Brass |