Aluminum: is a metal with composition properties that include durability, malleability and a notable weight to strength ration. Aluminum is one of the most widely used manufacturing materials as a result of its easy machinability and resistance to corrosion.
Aircraft: deals with the development and manufacturing of products, structures, materials and devices used in aircrafts. Aircraft standards are established based on the extreme temperature, pressure and ware exposure faced in air operations.
Special Washers: are any washers defined by non-standard qualities and non-circular interiors and exterior shaping. Special washers include washers customized through materials, diameter measurements and ratios, height (thickness) and form.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| N401P3 | N401P3 | 2750 | 0.183 | 0.089 | 0.022 | |
| NAS1149D0532K | NAS1149D0532K | 1675 | REV 4 | 0.562 | 0.328 | 0.032 |
| MS9321-15 | MS9321-15 | 0 | AS9321 | 1.125 | 0.588 | 0.125 |
| AN960-KD2116L | AN960-KD2116L | 0 | REV 21 | 2.062 | 1.328 | 0.016 |
| NAS1149CN232R | NAS1149CN232R | 99300 | REV 4 | 0.250 | 0.099 | 0.032 |
| NAS1515-M3L | NAS1515-M3L | 0 | REV 4 | 0.438 | 0.203 | 0.031 |
| MS9320-04 | MS9320-04 | 0 | AS9320 | 0.250 | 0.119 | 0.031 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-223-120 | 0.375 | 0.111 | 0.12 |
| 440-91-031 | 0.312 | 0.15 | 0.031 |
| 440-31-031 | 0.156 | 0.093 | 0.031 |
| 300-1716-008 | 0.895 | 0.338 | 0.008 |
| 300-1678M-080 | 0.5 | 0.327 | 0.08 |
| 910-87-078 | 1.187 | 0.687 | 0.078 |
| Title | Outside Dia. | Outside Dia. Tolerance | Inside Dia. | Inside Dia. Tolerance | Thickness | Thickness Tolerance | Material |
|---|---|---|---|---|---|---|---|
| SP2-29 | .375 | .005 | .250 | +.005-.000 | .010 | .001 | Stainless Steel |