Aluminum: is a metal with composition properties that include durability, malleability and a notable weight to strength ration. Aluminum is one of the most widely used manufacturing materials as a result of its easy machinability and resistance to corrosion.
Commercial: refers to those industries developing and manufacturing products for consumer use. While the industrial term is broad, commercial components must comply with all product and application criteria to provide functionality, and in many cases, a cosmetically and commercially appealing quality.
One Wave Washers: are intended to reduce joint loosening over time and for minimal deflections in tighter applications. Friction control and prevention of damage caused by vibration are common motivations for use.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| NAS1149CN016R | NAS1149CN016R | 7600 | REV 4 | 0.188 | 0.068 | 0.016 |
| NAS1149F1232P | NAS1149F1232P | 9150 | REV 4 | 1.312 | 0.765 | 0.032 |
| AN960-B2 | AN960-B2 | 15000 | REV 21 | 0.250 | 0.099 | 0.032 |
| NAS1149DN232H | NAS1149DN232H | 0 | REV 4 | 0.250 | 0.099 | 0.032 |
| MS15795-517 | MS15795-517 | 0 | NASM15795 REV 1 | 1.250 | 0.500 | 0.064 |
| NAS620C2 | NAS620C2 | 1214000 | REV 7 | 0.149 | 0.089 | 0.016 |
| MS91124-1 | MS91124-1 | 0 | 0.390 | 0.257 | 0.020 |
| Title | Outside Dia. | Inside Dia. | Thickness | Material |
|---|---|---|---|---|
| 475-185-020 | 0.31 | 0.192 | 0.02 | Aluminum |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 220-194-016 | 0.312 | 0.15 | 0.016 |
| 220-348-125 | 0.62 | 0.26 | 0.125 |
| 650-5129-130 | 1.875 | 1.004 | 0.13 |
| 650-4886-095 | 1.375 | 0.783 | 0.095 |
| 650-910-060 | 0.484 | 0.168 | 0.06 |
| 550-147-031 | 0.735 | 0.171 | 0.031 |