Brass: is created from alloying copper and zinc. Properties such as malleability, strength, and wear resistance may be modified according to other elements introduced through the alloyed process.
Industrial: deals with the development and manufacturing of washers and shims for devices used in various industrial manufacturing arenas.
Flat Washers: primarily used with other hardware, such as nuts and bolts to distribute forces in the process of tightening. Tightness is determined by pattern features such as nominal screw sizes, screw pitch thread, interior and exterior diameter ratios and height.
Washers: circular hardware used for spacing, load distribution, sealing and vibration reduction. Washers are produced through stamping and shaping a variety of materials including various metal, plastic, rubber and fiber.
For more information on flat washers
For more information on washers click here
For more information on belleville washers
For more information on one wave washers
For more information on special washers
For more information on three wave washers
For more information on wave washers
Below are sample line items we carry.
| Title | Part Number | QTY-OH | DRAWING | OUTER DIAM | INNER DIAM | THICK |
|---|---|---|---|---|---|---|
| AN960-C2 | AN960-C2 | 171200 | REV 21 | 0.250 | 0.099 | 0.032 |
| MS51412-4A | MS51412-4A | 1841 | REV C | 0.625 | 0.281 | 0.051 |
| N402P37B6 | N402P37B6 | 0 | 0.433 | 0.151 | 0.036 | |
| N401P52 | N401P52 | 0 | 2.980 | 1.292 | 0.140 | |
| N402P8C | N402P8C | 4800 | 0.370 | 0.183 | 0.036 | |
| AN960-XC2016L | AN960-XC2016L | 0 | REV 21 | 2.000 | 1.265 | 0.032 |
| AN960-PD1416L | AN960-PD1416L | 0 | REV 21 | 1.500 | 0.890 | 0.016 |
| Title | Outside Dia. | Inside Dia. | Thickness |
|---|---|---|---|
| 650-3105-086 | 1.375 | 0.345 | 0.086 |
| 650-2523-075 | 0.627 | 0.282 | 0.075 |
| 650-2781-005 | 0.625 | 0.316 | 0.005 |
| 650-4777-015 | 1 | 0.749 | 0.015 |
| 365-149-010 | 0.626 | 0.251 | 0.01 |
| 300-1797-002 | 0.687 | 0.376 | 0.002 |
| Title | Size | Outside Dia. (min/max) | Inside Dia. (min/max) | Thickness | Free Height (min/max) | Material |
|---|---|---|---|---|---|---|
| BT8-245010 | 8 | .240/.250 | .168/.176 | 0.01 | .033/.053 | Stainless Steel - 410 |